สินค้า 7/8

LENKENG LKV314 3D 1x4 HDMI splitter (1 HDMI in put to 4 HDMI out put)
Model: IMP_LK_LKV314 32 ชิ้น ใน stock โรงงานผู้ผลิต โดย: Lenkeng Technology Limited วันที่บันทึกสินค้า : 16 ม.ค. 2012 แก้ไขล่าสุด : 5 ม.ค. 2016 ส่งสินค้าได้ ภายใน : 2-3 วัน หลังจากแจ้งโอนเงิน		ราคาสินค้า 2,490.00บาท 1,990.00บาท ประหยัด: 20% off ( ราคารวม 7% แล้ว)
		หยิบสินค้า ใส่ตระกร้า:

รายละเอียดสินค้า

LENKENG LKV314 3D 1x4 HDMI splitter (1 HDMI in put to 4 HDMI out put)

LKV314 3D 1x4 HDMI splitter distributes 1 HDMI source to 4 HDMI displays simultaneously. It offers HD video solution for super market; shopping Mall; HDTV, STB, DVD and projector factory; data control center; information distribution; conference room presentation; education and training, corporation show room, luxurious house, etc. It supports 3D.

Input Video Signal	0.5 -1.0 volts p-p
Input DDC Signal	5 volts p-p (TTL)
Max Single Link Range	1920X1080, 1080P; 3D 1080P / 24HZ
DVI	480p/576p/720p/1080i/1080P (50HZ; 60HZ); 3D 1080P / 24HZ
Resolutions DTV/HDTV	480p/576p/720p/1080i/1080P(50HZ; 60HZ); 3D 1080P / 24HZ
Operating Frequency	Up to 225MHz
EIDI Duration	6 seconds
Power supply	DC 5V
Max. cable extension	10 meters by 28AWG HDMI cable; 15 meters by 26AWG HDMI cable

Interface Specification

1. Power switch; 2. Power LED,
3. 5. HDMI Output LED; 4. HDMI Input LED;
6. 8. HDMI Output; 7. HDMI Input;
9. Power Supply

Package Info:

	Weight (kg)	Dimension (LxWxH cm)
Product	0.388	16X8.2X2.6
Gift Box(1pcs with accessories and gift box)	0.62	20.5X15.5X7
Carton Box (20pcs)	11.54	44X34X39

คำถาม ที่ถามบ่อยๆ :

1). The splitter does not appear to be functioning.

Firstly, check if the LED lights, the power supply is connected and the power switch is turned on. Secondly, make sure all cables are well connected, and are in good condition. Thirdly, make sure the length of the cables is within the MAX supported length of this splitter. Lastly, please try to connect the input device to the display directly to see if it display normally.

2). The LED does not light.

Make sure you use the accessory power supply of the splitter. Power supply connected with voltage higher than 5V may damage the splitter.

3) If the MAX. resolutions of the four displays are not the same, what resolution will be output?

The splitter will automatically detect the MAX. supported resolution of each eight displays and output the lowest one